So, you’ve got a DISH remote in one hand and your TV staring back at you. And you’re wondering… how do I make these two best friends? Don’t worry — programming a DISH Network remote to your TV is easier than it sounds. This guide walks you through it step by step.
Let’s get that remote working, shall we?
First things first — which remote do you have?
DISH remotes usually come in two main types:
- 40.0, 50.0, 52.0, 54.0 models (Voice and Hopper remotes)
- Older models like 20.0 or 21.0 (No voice feature)
The steps are slightly different based on your remote. But don’t stress — we’ll cover both.
For Newer DISH Remotes (like 50.0, 52.0, 54.0)
These are the modern remotes that come with the Hopper, Joey, or Wally receivers.
Step 1: Press the Home button
Press the Home button twice (or Menu once, if Home isn’t there). This opens the settings screen.
Step 2: Go to “Remote Control”
Use the arrow keys to scroll to Settings > Remote Control.
Step 3: Choose the device
Select the TV you want to program.
Step 4: Hit “Pairing Wizard”
Choose the Pairing Wizard — this guides you through picking your TV brand and syncing it.
Step 5: Follow the prompts
You’ll be asked to test volume and power. If it works, you’re done!
Boom! Your DISH remote is now connected to your TV.
For Older DISH Remotes (like 20.0 or 21.0)
These use code-based programming.
Step 1: Press and hold the TV button
Hold it until all the mode buttons light up. Then release it.
Step 2: Enter the TV code
Use your remote’s number pad to enter the code for your TV brand. (You can find these codes in your remote manual or on the DISH website.)
Step 3: Test it out
Try the volume or power button. If it works — awesome! If not, try a different code until one works.
Can’t find the right code?
Try the scan method:
- Press and hold the TV button until lights flash.
- Press the Power button.
- Repeatedly press the Up arrow until your TV turns off.
- Press the # key to lock in the code.
This works when you don’t know your TV code.
How to Reprogram or Reset Your DISH Remote
Want to connect it to a different TV? Or fix a glitchy remote?
- Unpair the old TV: Go to Settings > Remote Control, choose your TV, and hit “Unpair.”
- Start fresh: Follow the steps above to reprogram.
Need a full reset? Hold the SAT button, then press System Info on your receiver. Choose “Remote Address” and re-pair.
FAQs
How do I connect my DISH remote to my TV?
Use the Settings > Remote Control > Pairing Wizard path on newer remotes, or manual codes for older ones.
Can I program the remote without a code?
Yes! Use the scan method if you don’t have a code.
How do I sync my remote with the receiver too?
Press the SAT button, then go to your receiver and hit the System Info button. On-screen instructions will guide you.
How do I calibrate the DISH remote to my TV?
Calibration is basically programming. If volume, power, and input buttons work — you’re calibrated!
Can I connect the remote to other devices like a soundbar?
Yes, if supported. Use the pairing wizard and choose your soundbar brand instead of the TV.
Final Thoughts:
Programming a DISH Network remote to your TV might sound techy, but it’s honestly a breeze once you get the hang of it. Whether you’re syncing a new remote, reprogramming an old one, or trying to ditch that extra TV remote — you’ve got this.
And if all else fails… don’t worry. DISH customer support is just a call away. If you want to enjoy the satellite TV services, join hands with Inspire Communication.
Want more helpful guides like this? Stick around — we keep things straight and simple. Happy channel surfing!